GetIS1893_2002 {Auto Seismic}

GetIS1893_2002

Syntax

SapObject.SapModel.LoadPatterns.AutoSeismic.GetIS1893_2002

VB6 Procedure

Function GetIS1893_2002(ByVal Name As String, ByRef DirFlag As Long, ByRef Eccen As Double, ByRef PeriodFlag As Long, ByRef CT As Double, ByRef UserT As Double, ByRef UserZ As Boolean, ByRef TopZ As Double, ByRef BottomZ As Double, ByRef INZFlag As Long, ByRef INZ As Double, ByRef INS As Long, ByRef INI As Double, ByRef INR As Double) As Long

Parameters

Name

The name of an existing Quake-type load pattern with an IS1893_2002 auto seismic load assignment.

DirFlag

This is either 1 or 2, indicating the seismic load direction.

1 = Global X

2 = Global Y

Eccen

The eccentricity ratio that applies to all diaphragms.

PeriodFlag

This is 1, 2 or 3, indicating the time period option.

1 = Approximate

2 = Program calculated

3 = User defined

CT

The code-specified CT factor (m). This item applies when the PeriodFlag item is 1.

UserT

The user specified time period. This item applies when the PeriodFlag item is 3. [s]

UserZ

This item is True if the top and bottom elevations of the seismic load are user specified. It is False if the elevations are determined by the program.

TopZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the highest level where auto seismic loads are applied. [L]

BottomZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the lowest level where auto seismic loads are applied. [L]

INZFlag

This is either 1 or 2, indicating if the seismic zone factor is per code or user defined.

1 = Per code

2 = User defined

INZ

The seismic zone factor, Z.

If the seismic zone factor is per code (INZFlag = 1), this item should be one of the following: 0.10, 0.16, 0.24, 0.36.

INS

This is 1, 2 or 3, indicating the soil type.

1 = I

2 = II

3 = III

BOCA96R

The response modification factor.

INR

The importance factor.

INR

The response modification factor.

Remarks

This function retrieves auto seismic loading parameters for the 2002 IS1893 code.

The function returns zero if the parameters are successfully retrieved; otherwise it returns a nonzero value.

VBA Example

Sub GetSeismicParametersIS18932002()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

Dim DirFlag As Long

Dim Eccen As Double

Dim PeriodFlag As Long

Dim CT As Double

Dim UserT As Double

Dim UserZ As Boolean

Dim TopZ As Double

Dim BottomZ As Double

Dim INZFlag As Long

Dim INZ As Double

Dim INS As Long

Dim INI As Double

Dim INR As Double

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New3DFrame(BeamSlab, 2, 144, 3, 336, 2, 432)

'add new load pattern

ret = SapModel.LoadPatterns.Add("EQX", LTYPE_QUAKE)

'assign IS1893_2002 parameters

ret = SapModel.LoadPatterns.AutoSeismic.SetIS1893_2002("EQX", 1, 0.05, 1, 0.075, 0, False, 0, 0, 1, 0.36, 3, 1, 5)

'get IS1893_2002 parameters

ret = SapModel.LoadPatterns.AutoSeismic.GetIS1893_2002("EQX", DirFlag, Eccen, PeriodFlag, CT, UserT, UserZ, TopZ, BottomZ, INZFlag, INZ, INS, INI, INR)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 11.01.

Changed nomenclature from Load Cases, Analysis Cases and Response Combinations to Load Patterns, Load Cases and Load Combinations, respectively, in version 12.00.

See Also

SetIS1893_2002